Hydraulic pneumatic power cleaning technology adopts the principle of "hole effect". The cleaner is placed in the pipeline and moves forward rapidly under water pressure. High pressure cleaning the blades on the pipe cleaner produces high frequency, intense shivering, and the surrounding movement cleaners continue to swirl rapidly and form a continuous, moving low pressure. The water flow always enters the evaporation state in this area, resulting in millions of small bubbles, which are lost to the high pressure water flow, and the foam is compressed under high pressure. The final rupture, as high as 800-1000 MPa of strong explosive force, makes the dirt and sediment loose and broken, to achieve the purpose of cleaning up the dirt.
Working Principle of Electric Pulse Cleaning Technology电液秤清洗装置是一种利用“电液效应”原理的能量转换器。首先，将绝缘电缆放入注水管道中，通过强脉冲电流在水中放电，使局部迅速汽化，激发等离子体的“溅射现象”，汇聚成强激波。这种冲击波的能量可以达到每秒1500个大气压左右。在管道内爆过程中，由于污垢和管壁弹性模量和振动频率的差异，导致管道疏浚，从而使沉积物松动剥离。
Electro-hydraulic scale cleaning device is an energy converter based on the principle of "electro-hydraulic effect". Firstly, the insulated cable is put into the water injection pipeline, and the strong pulse current discharges in the water, which makes the part vaporize rapidly and excites the "sputtering phenomenon" of the plasma, and converges into a strong shock wave. The energy of this shock wave can reach about 1500 atmospheres per second. In the process of pipeline implosion, due to the difference of elastic modulus and vibration frequency between fouling and wall, the pipeline is dredged and the sediment is loosened and peeled off.
Working Principle of Ultrasound Cleaning Device该装置采用“孔效应”原理。在液体中，超声波通过正弦曲线传播，即一层强，一层弱。弱声信号作用于液体时,它会产生一定的负压,使液体蒸发,形成许多小气泡,当强烈的声学信号作用于液体,它将产生一定的正压,压缩形成泡沫破裂,使污垢和沉积物松散和粉碎。
The device adopts the principle of "hole effect". In liquids, ultrasonic waves propagate through sinusoidal curves, that is, one layer is strong and one layer is weak. When the weak sound signal acts on the liquid, it will generate a negative pressure, which will make the liquid evaporate and form many small bubbles. When the strong acoustic signal acts on the liquid, it will produce a positive pressure, compress to form a foam rupture, and make the dirt and sediment loose and shatter.
Working Principle of Gas Pulse Cleaning
The pulsed vibration generator of compressed air emitted by high-pressure air flows into the pipeline with water to form high pressure pulsed water jet. With the bubble burst, the strong shock wave and flow of inspiration are rushing into the pipeline, rushing fiercely to the water pipes, and mixing with broken, stripped hard impurities (sand particles, rust, slag, etc.), creating a huge "sensation effect". This is a clean, thorough cleaning of the pipeline.
Pipeline Maintenance Technology and Working Principle一种实际涂布线条的方法。这种独特的方法使用了混凝土和聚合物的混合物。同时还可完成废弃管道的修复和防腐涂层的处理。修复管道内部安装了一个坐在干净的穿孔,甮涂层穿孔和光滑。修复清洗冲床与涂层冲床之间的液位。当压缩机开始供气并通过接收器时，冲头开始沿着管子移动。这个过程将重复进行，直到达到所需的涂层厚度和平滑度，以疏通管道。
A practical method of coating lines. This unique method uses a mixture of concrete and polymer. At the same time, the repair of abandoned pipelines and the treatment of anti-corrosion coating can be completed. Inside the repair pipeline, a clean perforation, coating perforation and smoothness are installed. Repair the liquid level between cleaning punch and coating punch. When the compressor starts to supply air and passes through the receiver, the punch starts to move along the pipe. This process will be repeated until the required coating thickness and smoothness are achieved to dredge the pipeline.
的相关内容，希望大家能了解!想要了解更多内容，欢迎访问网站：http://www.lrsuo.comThis is the relevant content of Jinan pipeline dredging, I hope you can understand! For more information, please visit the website: http://www.lrsuo.com.