Pipeline dredger is a kind of machine to dredge toilets or sewers. According to different power sources, pipe dredger can be roughly divided into manual pipe dredger and electric pipe dredger. This paper mainly introduces the electric pigging machine.
Most professional dredgers adopt electric pipe dredgers, which are more powerful and efficient. Insert the soft shaft into the machine, turn on the power switch, press the clutch rod manually, tighten the soft shaft, drive the soft shaft to rotate, loosen the clutch rod, and stop the rotation of the soft shaft. Electric pipeline dredger is usually equipped with a variety of tool heads. According to different plugging performance, different types of tool heads are selected for dredging.
Jinan pipeline dredging
The special dredging spring is extended from the dredger to the blocked position of the pipeline. The spring handle is pressed and the power supply is turned on. The blocked pipeline is dredged gradually by swinging the dredging spring forward in the pipeline. Pipeline dredger usually has two holes in and out. The opening of the drum suspended on the electric dredger is the entrance of the dredging spring. Opposite to the automatic head is the outlet of the dredging spring. Many people mistakenly think that the operation of electric pipe dredger is very complicated. In fact, it is not like this. A single poke will break the window paper. If you can see someone has used it once, you won't have any questions.
When using the 16 mm thick spring in the basket, remove the roller suspended on the machine. The spring is passed through the air inlet of the front hanging drum and then through the air outlet with automatic head. Install the cutter head to make the plug of the sewer unobstructed. Because when the machine starts, the whole connected dredging spring will swing, so don't forget to install the spring on half of the machine and the other half in the iron basket! According to the routine procedure, the dredging spring should be connected outside the dredger entrance according to the length required for dredging. Household dredgers are usually equipped with only 12 meters of dredging springs.
Jinan pipeline dredging
The automatic head can be used with 16 mm thick spring. It's better to feed the spring directly into the pipe by hand, so it won't be particularly troublesome. Because the automatic magnetic head is a small iron tongue stuck on the spring, forcing the spring forward and backward. It is easy to break if the dredging spring is not properly used. Especially when moving to spring and spring joint, the small iron tongue of the automatic head must be fixed in advance, otherwise, there will be problems. Therefore, the manufacturer in the dredger automatic lift position posted: "use automatic head stretching soft spring, risk-taking" precautions.
Electric pipeline dredgers must use well grounded tripole plugs and sockets. The power supply should be cut off immediately after the operation is completed, and then the site cleaning and maintenance work should be carried out. Source: Jinan pipeline dredging website http://www.lrsuo.com